You are watching: Jeep grand cherokee brake light problem
My Tail light and also Brake irradiate dont work-related on my ideal side, yet my blinker and reverse light occupational . All other lights work.Already changed the bulbs. Is this a fuse possibly ? any kind of solutions/ideas substantially appreciated.Thanks
Not certain if the WK"s have them, yet in mine ZJ there"s a lamp Outage Module (L.O.M.) in the rear quarter panel, drivers side, that fried & caused comparable issues. Unplugged the harnesses because that the lamp from the l.o.m. & plugged the harnesses together. BAM, functioning brake/tail lights. HTHSam
1994 ZJ, 3.5", 33" Trxus MT, HP D30 4.56, XJ D44 4.56 w/Detroit2004 WJ Ltd. Share QuadraDrive 235 70R17 Cooper AT3
In a wk the brake and tail deserve to be affected by three 10 amp fuses in a black box under the hood. Sent out from mine SPH-L710 using Tapatalk 4 Beta
-no humans or pets were harmed in the do of this message. However, a big number of electron were considerably inconvenienced.
Three red 10 amp fuses. Examine all 3. Most likely that 1 is blown.
-no people or pets were harmed in the making of this message. However, a large number of electrons were considerably inconvenienced.
that may not apply, i watch you have actually an 06. I have actually an 08. Check the fuses under the hood in either case.
-no people or pets were harmed in the making of this message. However, a huge number of electrons were significantly inconvenienced.
Same diagram as i have under mine hood. I changed the 3 red fuses(1 blew). My brake light functions now, the only thing not working is mine tail light. Im reasoning it might be the (lamp fuse) (black box favor fuse right listed below the 3 red fuses). When i activate mine lights ns hear a click, once i removed the fuse nobody of my behind lights worked, reasoning its this black color box fuse kind thing.?
-no human beings or pets were harmed in the make of this message. However, a huge number of electron were substantially inconvenienced.
I just replaced my (lamp relay ) didnt resolve the problem. Im stumped, is over there anything else i can check? ns really reasoning this is one electrical problem that i will certainly be unable to change by myself....Please recommend guys, im really appreciative for the help fellow jeep loversI have actually replaced 3 bulbs,3 fuses and also a desk lamp relay therefore far.
Could try switching the two bulbs and see if the problem follows. Likewise see if that is seated fine without corrosion. Perform you use bulb grease? I recognize you already replaces but it help to eliminate all possibilities before it gets real expensive.Sent from my SPH-L710 using Tapatalk 4 Beta
-no humans or pets were harmed in the do of this message. However, a big number of electron were significantly inconvenienced.
See more: Desirable Antique Winchester Model 1892 44 Wcf Value, 1892 Winchester 44
-no people or pets were harmed in the do of this message. However, a big number of electron were substantially inconvenienced.