Can someone write-up graphical pictures and also Step through Step overview for removed Dash and replacing the prior Heater core in a 2006 dodge Caravan.

You are watching: 2001 chrysler town and country heater core replacement


*

*
691

*
768

*
2.2k


Sorry no pictures :)instructions at http://www.ehow.com/how_4520846_replace-...

Replacing the former Heater Core

1 turn the steering wheel so the the wheels allude straight forward.

2 Disconnect the negative (black) battery cable.

3 drainpipe the coolant by twisting open the valve in ~ the bottom that the radiator. Use a clean container that holds at the very least 10.5 quarts. You will reuse the coolant later.

4 remove the panel on the reduced left side of the steering column and disconnect the parking brake cable v a pair of pliers.

5 Unscrew the 10 bolts that attach the steering tower cover liner come the tool panel and remove the cover.

6 rotate the vital to the LOCK position and turn the steering wheel come the LOCKED position.

7 Unhook the gear change cable and also remove that is mounting bracket.

8 Unscrew the two screws that affix the bezel come the instrument panel and also remove the retaining clips. Eliminate the bezel.

9 eliminate the 2 screws that connect the steering shaft shroud to the column and remove the shroud.

10 eliminate the coupler indigenous the steering column and also intermediate steering shaft.

11 ease the nuts that affix the lower steering shaft mounting bracket, but do not remove them. Totally remove the two nuts and also washers native the upper bracket.

12 Pull the end the steering column.

13 eliminate the interconnect and also bracket that connects the instrument dashboard to the chassis wiring.

14 eliminate the boot from the bottom the the steering shaft.

15 use locking pliers to pinch turn off the heater hoses in the engine compartment. Remove the plate extending the heater main point (the hoses run v it) and also disconnect the hoses.

16 Unclip the connectors that host in the heater core. Lift the accelerator pedal to enable you to slide the heater core out part way. Push the brake pedal to do room to completely remove the heater core.

See more: How Much Does A Human Appendix Weigh ? Picture Of The Appendix

17 replace the heater core. Surroundings is the turning back of removal. The nuts on the steering obelisk mounting bracket must be torqued to 105 ft. Lbs. Speak the pinch bolt ~ above the coupler come 21 ft. Lbs.

It is obtainable at http://www.redlinemotive.com/replacement... And of course below http://www.car-stuff.com/dodgeheatercore... Not cheap :)